Evaporator Expansion and Extraction Vessels
Glass Expansion UniFit Connector with 0.25mm ID x 1.3mm OD x 700mm long tubing (PKT. 10)
UniFit Connector with 0.25mm ID x 1.3mm OD x 700mm long tubing sample tube. Package of 10 replacement sample lines. Compatible with Glass Expansion U-Series and DC Series Nebulizers. Used to carry sample from peristaltic pump tubing or mixing T to nebulizer. This consumable part should be replaced at a frequency of about every 6 months to ensure optimum sample flow.For the same UniFit Connectors with the same ID but a longer sample tube length of 1500mm, NFTS-075. For UniFit Connector with 0.5mm ID, 1.3mm OD x 700mm long sample tube, NC1625341. For UniFit Connector with 0.18mm ID, 1.3mm OD x 700mm long sample tube, NC1973499.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Screw Kit for Sampler Cone (PKT 4) Shimadzu 2030/2040/2050 ICP-MS (022-27001-00)
Screw Kit for Sampler Cone (PKT 4). Package of 4 replacement screws for Shimadzu 2030 ICP-MS sampler cone. Replace sampler cone screws if corroded or worn. Use 10x Magnifier Inspection Tool with Built-In LED Illumination (NC2042261) to inspect cone orifice condition. When cones are not in use, keep them stored in original packaging for protection.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Grainger Mech Expansion Plug T-Handle 3.89 H
The Grainger 14M009 is a 14-inch diameter, 9-blade fan made by Dayton that can move up to 21,000 cubic feet of air per minute. It features a 1/3 horsepower motor with a 1050 RPM rating and a 6-inch width. The fan blades are made of aluminum and it can be mounted to the ceiling with included hardware. This high volume circulation fan is designed for commercial and industrial settings.
Glass Expansion O-ring for Thermo 6000/7000 Duo ICP-OES Periscope Window
O-ring for Thermo 6000/7000 Duo ICP-OES Periscope Window (PKT 10). A package of 10 replacement O-rings for the Thermo 6000/7000 Duo Series ICP-OES.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Injector Adaptor for D-Torch Spectro SOP
Injector Adaptor for D-Torch. Compatible with Glass Expansion D-Torch (P/N 501907023, 30-808-2928) for Spectro (Ametek) SOP Modula, Ciros, Genesis, and Arcos Radial ICP-OES. Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion SeaSpray DC Nebulizer 0.4mL/min, Includes NFT-16-50 UniFit Connector with 0.50mm ID x 1.6mm OD x 700mm long tubing (1 piece), and 70-803-1292 Gas Fitting with Ratchet Nebulizer connector. Compatible with Thermo Q, RQ and TQ.
SeaSpray DC Nebulizer 0.4 mL/min, includes UniFit Connector with 0.50mm ID x 1.6mm OD x 700mm long tubing (1 pc.) and DC Gas Fitting Type 31 with ratchet connector (1 pc.). Compatible with Thermo Q, RQ and TQ.Optimum nebulizer gas flow rate is 1.0 L/min and sample flow rate is 0.4 mL/min. Recommended not to exceed optimum 0.4 mL/min sample flow rate; however, lower gas and sample flow rates are OK. The backpressure should read ~40 psi at 1.0 L/min gas flow rate. Can tolerate up to 20% TDS. We recommend the use of the Elegra Argon Humidifier to achieve best performance with high TDS.Replacement parts include P/Ns NFT-16-50 and 501907289.Recommend nebulizer maintenance tools are Fluka RBS25 (P/N NC9000117) and Eluo Nebulizer Cleaning Tool (P/N NC9462559). When nebulizer is not in use, best to store in the provided hard plastic case.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Skimmer ConeGuard PerkinElmer Elan Series
Skimmer ConeGuard PerkinElmer Elan Series. For use with PerkinElmer 6000/9000/DRCII/DRC-E ICP-MS skimmer cones to protect cone threads during cleaning. Compatible with Nickel Skimmer Cone NC1585740 and Platinum Skimmer Cone 501907683. Use 10x Magnifier Inspection Tool with Built-In LED Illumination (NC2042261) to inspect cone orifice condition. When cones are not in use, keep them stored in original packaging for protection.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Grainger Mech Expansion Plug T-Handle 3.97 H
The Shaw Plugs 14M011 Mechanical Expansion Plug is a 3/8" diameter zinc alloy expansion anchor with a 1-1/4" embedment depth. It is designed for use in hardened concrete and can withstand tension loads up to 50 lbs and shear loads up to 30 lbs. The expansion plug features a split expansion clip and cone expander for easy installation by hammering directly into a pre-drilled hole. Once set, it provides a permanent threaded anchor point to attach fixtures and other hardware to concrete surfaces. This zinc alloy plug offers corrosion resistance for long-lasting durability.
Glass Expansion Guardian Probe for Cetac ASX-112FR
Guardian Probe for ASX-112FR, probe only. Compatible with Teledyne Cetac ASX-112FR autosampler. Requires a UniFit sample capillary available in IDs of 0.18mm (P/N 70-803-2085), or 0.25mm (P/N 70-803-2030). The unique, robust tip design eliminates crushed and damaged tips due to misalignment. Drip-resistance prevents cross contamination of samples during probe movement, especially with oils. Built-in particle filtering holds back particulates from blocking the line. Completely inert design, all PEEK and PTFE construction, the Guardian autosampler probe provides exceptional resistance to strong acids and solvents.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-900
Glass Expansion Semi-Demountable Torch Body Thermo X-Series
Semi-Demountable Torch Body. Compatible with Thermo X-Series ICP-MS. For use with Glass Expansion’s semi-demountable torch adaptor 31-808-0984. Injector options include Tapered Alumina Injector 1.5mm (501907125, 31-808-1013), Sapphire Injector 2.0mm (501907171, 31-808-3001) and Platinum Injector 1.5mm (31-808-1256).Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Grainger Mech Expansion Plug Snap Handle 2.53 H
The MECH Expansion Plug with Snap Handle from Grainger is a 2-53"H mechanical expansion plug made of zinc with a snap handle for setting. It has a 5/8" nominal size and is designed for use in concrete with a temperature range of -65 to 300°F. This zinc expansion plug provides a tight, vibration-resistant fit and is ideal for commercial and industrial applications. The snap handle allows for quick and easy setting.
Glass Expansion Semi-Demountable Torch with 2.4mm Alumina Injector Agilent 7700/7800/7900/8800/8900 ICP-MS Injector options: Sapphire 2.4mm Capillary Injector 31-808-4159 and 2.4mm Tapered Quartz Injector 31-808-4168
Semi Demountable Torch (SDT) with 2.4mm Alumina Injector. Suitable for Agilent Technologies 7700/7800/7900/8800 and 8900 ICP-MS.This Semi-demountable quartz torch with alumina injector is suitable for use with aqueous, including HF, and organic solvent-based matrices. Optional injectors include 2.4 mm Tapered Quartz Injector (NC2046978) and 2.4 mm Tapered Sapphire Injector (NC2046976). Replacement parts include the Injector Adaptor (31-808-4129) and Semi Demountable Torch Body (NC2046979).Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Guardian Probe for SPS3/SPS4/AIMS, with 0.75mm ID Probe Connecting Line (Red)
Guardian Probe for SPS3/SPS4/AIMS, with 0.75mm ID Probe Connecting Line (Red). Compatible with Aim Lab & Agilent SPS3/SPS4 Autosamplers. The unique, robust tip design eliminates crushed & damaged tips due to misalignment. Drip-resistance prevents cross contamination of samples during probe movement, especially with oils. Built-in particle filtering holds back particulates from blocking the line. Completely inert design, all PEEK & PTFE construction, the Guardian autosampler probe provides exceptional resistance to strong acids & solvents. The Guardian probe has an ID of 1mm, with other interchangeable UniFit sample capillaries available in IDs of 0.3mm Black 70-803-1853, 0.5mm Blue 70-803-1852, & 1mm Green 70-803-1721.Replacement probe 70-803-2008. Replacement Red 0.75mm ID Probe Connecting Line 70-803-1714. Replacement Mount Nut, 70-803-1776. Guardian Probe for Teledyne Cetac autosamplers, see 70-803-1803.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-900
Grainger Mech Expansion Plug Wing Nut 2.3 H
The Shaw Plugs 14M030 Mechanical Expansion Plug is a 3/8" diameter zinc-plated steel mechanical expansion anchor with a 1-1/4" embedment depth. It is designed for use in hardened concrete and can withstand tension loads up to 60 lbs and shear loads up to 45 lbs. The expansion plug features a cone expander with zinc plating for corrosion resistance. To install, simply drill the appropriate sized hole, insert the plug and drive the pin until it bottoms out. This provides an economical threaded anchor point in concrete.